| patrick@jsf.patrickindallas.com |
|
| www.jsf.patrickindallas.com |
|
|
| My name is Patrick Taylor, and my resume is attached. I am currently looking for a Process Engineering Technician position within
your company. As you can see from my resume, my AAS degree as well as my diverse skills and 8 years of direct experience make me a strong yet flexible candidate for this position. |
| I have spent the last 7 years as a Process Engineering Technician in the Photolithography module of DFAB at Texas Instruments, Inc thus I am highly and uniquely qualified for this position. |
| In my resume you will find that my current skill set is both wide and deep, both theoretical and practical, both academic and experiential. I have studied electronics (both analog and digital) and have experience with technical troubleshooting and repair techniques in addition to having fab experience. |
| I have exhibited both stability and dependability in my work history, and I have always aspired to be a tremendous asset to the companies that have hired me in the past. Upon completion of my degree, I went to work for Texas Instruments Inc. where I have held an Engineering Technician position for the last 7 years. Due to market contraction during the current global economic recession, my position at TI has been eliminated. |
| I am available (and would prefer) to begin immediately. I am able and willing to travel. |
| I would appreciate the opportunity to discuss my credentials with you at a mutually convenient time. Thank you for your consideration. |
|
|
| 214-717-5049 (voice mail) |
|
| patrick@jsf.patrickindallas.com |
|
| www.jsf.patrickindallas.com |
|
|
| Objective: |
| A position as a Process Engineering Technician in the semiconductor industry. |
|
|
| Experience: |
Texas Instruments Inc. |
Dallas, TX 75243 |
| |
Process/Equipment Engineering Technician |
07/2000 to 02/2009 |
| |
 |
Executed daily operations of photolithography module of a wafer fab tasked with semiconductor microchip fabrication. |
|
|
Experience
testing/operating the following tool sets (in order of decreasing time
spent on tool): Canon steppers g- and i-line, FSI Polaris workcells in
multiple configurations, Nikon steppers G6/7, G3/4 and I8, KLA
registration and inspection tools, AMAT Opal SEM's, Nikon inspection
tools, UV ellipsometry tools, Nanospec reflectometry tools, Leica
inspection tools, Microtronic EAGLEviews, SOG coaters, Gasonics ashers,
LAM plasma etchers |
|
|
Experienced in SPC/WECO
analysis, all MS Office software, both PC's and Mac's, and enough UNIX to
control FSI workcells. |
|
|
Made dispositions on all rejected wafers in the Photo module and some in Diffusion/Wet, Plasma and Thin Film modules. |
|
|
Responded to written and telephone requests for all process engineering, tool maintenance and quality support. |
|
|
Maintained system logs and manuals to document testing and operation of equipment. |
|
|
Wrote reports and recorded data on testing techniques, laboratory equipment, and specifications to assist engineers. |
|
|
Trained
and managed training/quality for a team of 15-30 manufacturing
specialists and achieved significant improvements in their productivity
and quality. |
|
|
Trained multiple manufacturing specialists in operating photolithographic fabrication and metrology equipment. |
|
|
Successfully handled quality control for a team of 15-30 specialists who operated 60+ tool sets. |
|
|
Developed
and upgraded preventative maintenance procedures for components,
equipment, parts and systems in semiconductor fabrication. |
|
|
Structured and maintained a web site and training regimen for newly hired manufacturing specialists. |
|
|
Responsible for extensive training of new Process Engineering Technicians and Engineers. |
|
|
Represented Process Engineering in meetings and quality analyses during overnight shifts. |
|
|
Was instrumental in reducing the module's cycle time and increasing its process yield/quality. |
|
|
Wrote, designed and produced web sites, spreadsheets, and presentations for the photo process engineering module. |
|
|
Wrote computer software programs to assist myself and the photo specialist teams. |
|
| |
Cuplex Incorporated (closed) |
Garland, TX 75040 |
| |
QC/Fabrication Technician |
03/1993 to 07/2000 |
| |
|
|
Executed daily operations of circuit board fabrication. |
|
|
Wrote reports and recorded data on critical measured dimensions during the fabrication profile of printed circuit boards. |
|
|
Wrote computer software programs for automated metrology equipment. |
|
|
Trained and managed a team of 5 coworkers. |
|
|
Read
blueprints and engineering instructions for all profile steps including
drilling, countersinking, and beveling of circuit boards. |
|
|
Fabricated printed circuit boards using CNC routing and drilling machines. |
|
|
| Education: |
University of Texas -Dallas |
Richardson, TX 75080 |
| |
Electrical Engineering/Computer Science |
Not yet completed. |
| |
|
|
Relevant
Coursework includes: Digital Systems w/Lab, Digital Circuits w/Lab,
Electrical Network Analysis w/Differential Equations, Probability and
Statistics, Computer Architecture w/MIPS Processor, Advanced
Engineering Math w/Complex Analysis, Java programming |
|
|
Completed team project tasked with modeling the MIPS processor using Verilog HDL. |
|
| |
Richland College |
Dallas, TX 75243 |
| |
Associate of Arts and Sciences |
2000 |
| |
|
|
Relevant
Coursework includes: Full Calculus sequence through Multivariate,
Differential Equations, Applied Linear Algebra, General Physics
including Mechanics and Electromagnetics (calculus based), Chemistry
for Engineers, C++ programming, Electronics Laboratory Techniques,
Circuits I for Electrical Engineering |
|
|
Graduated with 4.0/4.0 GPA while working 40+ hours/week. |
|
| |
(2 day Industry Classes with Lab Components) |
|
| |
|
|
AC
Circuits, DC Circuits, Digital Circuits I & II, Discrete
Components, Power Supplies, Industrial Controls, Electro-Mechanical Shop |
|
|
Physics, Chemistry, Dimensional Analysis and Units |
|
|
|
English
Spanish |
100% fluency
80% fluency |
|
| Hobbies: |
| B&W photography - shooting, developing and printing |
| Independent study of Mathematics |
| Currently collecting data for regression analysis of ROI of eco-conscious decisions for single-member households. |
| Also studying the economic impetus of the Kenyan Mau Mau Uprising. |
|
|
| References: |
| Jennifer Pasel -Photo PE Technician |
| Robert Shadle -Photo Manufacturing Specialist |
| Linda Grinstead -Loan Officer |
| Aaron Pasel -Electrical Tech |
|
|
|
|
|